Welding parameter lookup
57 settings stated on camera by creators, extracted from 137 videos; each row links to the project and the moment in the original clip.
| Cell | Material | Welder | Setting | Source | |
|---|---|---|---|---|---|
| 18650 | Nickel strip + copper strip underneath | P60F | Pulse width 0.1 ms | Rural Abiao · Ep. 42 | Turning a… | |
| Tabless 21700 | Copper + nickel strip stacked weld (thickness not stated) | P60F | Gear 41 | Xiao Wa · Teaching you the 8… · 00:41 | |
| Jiashikai 32140 LiFePO4 | 0.2×50 copper strip (under) + nickel strip (on top) | P60F | Gear 587 · Pulse width Display 0.05ms / 07ms (preheat / pause, to be confirmed) | CrazyFun · This lesson is all… · 02:44 | |
| Jiashikai 32140 (steel-can negative) | 0.2 copper sheet + 0.15 nickel-plated (swapped for thinner nickel-plated, then back) straight on | P60F | Gear 400 (won’t hold) → 450 → 600 → 700 (burnt black but can’t be pulled off); 999-gear scale · Pulse width Preheat 0.1, pause 1 (preheat adjusted at level 600) ms | CrazyFun · 0.2 copper straigh… · 00:28 |
These are creators’ own settings as stated in their videos, not official AWithZ values; welder condition, tip wear and strip batch all matter — always test on scrap first.