Welding parameter lookup
57 settings stated on camera by creators, extracted from 137 videos; each row links to the project and the moment in the original clip.
| Cell | Material | Welder | Setting | Source | |
|---|---|---|---|---|---|
| 18650 | Nickel strip + copper strip underneath | P60F | Pulse width 0.1 ms | Rural Abiao · Ep. 42 | Turning a… | |
| Tabless 21700 | Copper + nickel strip stacked weld (thickness not stated) | P60F | Gear 41 | Xiao Wa · Teaching you the 8… · 00:41 | |
| 21700 NMC | Nickel strip + copper strip | UF20B | Gear About 25 (max 99) | 519fpv · Ep. 30 | One video… · 01:24 | |
| 26650 (test weld) | 0.05 copper strip; 0.05 steel strip; 0.1 steel strip (blown through) | U3pro (U3 Pro) | Gear 9 coarse gears + fine steps (99 in all); test gear not stated · Pulse width Interval / preheat left at default, ms | CrazyFun · Do you really have… · 02:37 | |
| Li-ion cell (18650, test welds) | Nickel strip 0.12 / 0.24; utility-knife blade 0.38; rated 0.15 copper / 0.4 nickel | UF20B | Gear 10 (0.12 + 0.24 nickel); 52 (0.38 blade + 0.24 nickel); 99 gears total · Pulse width Display 20ms / 0.00ms (preheat / pause at default) | IoT Everything · AWithZ UF20B super… · 00:52 | |
| Jiashikai 32140 LiFePO4 | 0.2×50 copper strip (under) + nickel strip (on top) | P60F | Gear 587 · Pulse width Display 0.05ms / 07ms (preheat / pause, to be confirmed) | CrazyFun · This lesson is all… · 02:44 | |
| — | 0.15 nickel strip; can take 0.1–0.15 copper on top | UF20B (P60F also on camera) | Gear 30 (both welders compared); 40 (harsher) | CrazyFun · Ep. 178 | The weld… · 00:27 |
These are creators’ own settings as stated in their videos, not official AWithZ values; welder condition, tip wear and strip batch all matter — always test on scrap first.