Welding parameter lookup
57 settings stated on camera by creators, extracted from 137 videos; each row links to the project and the moment in the original clip.
| Cell | Material | Welder | Setting | Source | |
|---|---|---|---|---|---|
| LiFePO4 32140 | Nickel-plated steel strip 0.2 | UF20B (touchscreen, voice-over says ‘a capacitor spot welder’) | Gear 30 | Battery Master Zhang · Building a 24V Li-… · 01:02 | |
| Jiashikai 32140 LiFePO4 | 0.2×50 copper strip (under) + nickel strip (on top) | P60F | Gear 587 · Pulse width Display 0.05ms / 07ms (preheat / pause, to be confirmed) | CrazyFun · This lesson is all… · 02:44 | |
| Jiashikai 32140 (steel-can negative) | 0.2 copper sheet + 0.15 nickel-plated (swapped for thinner nickel-plated, then back) straight on | P60F | Gear 400 (won’t hold) → 450 → 600 → 700 (burnt black but can’t be pulled off); 999-gear scale · Pulse width Preheat 0.1, pause 1 (preheat adjusted at level 600) ms | CrazyFun · 0.2 copper straigh… · 00:28 | |
| Jiashikai 32140 LiFePO4 | 0.1 copper strip + 0.1/0.12 nickel-plated (straight on); 0.15 nickel-plated base + 0.1 copper | UF20B (No. 6 pen, No. 6 lead with braided sleeve) | Gear Straight on: 40 → 70 → 90 (not solid); nickel base: 30 solid / 40 tears / 60 · Pulse width Preheat 10, pause 20 ms | CrazyFun · A follower asked w… · 02:46 | |
| Jiashikai (32140, steel-can negative) | Nickel-plated steel strip 0.1 or 0.12 (not sorted out) | UF20B (upgraded No. 6 welding pen) | Gear 1–5 (1 no stick / 2 slight / 3–4 peels off / 5 sticks slightly) · Pulse width Preheat 0, pause 0, trigger 1 ms | CrazyFun · AWithZ spot welder… · 00:25 |
These are creators’ own settings as stated in their videos, not official AWithZ values; welder condition, tip wear and strip batch all matter — always test on scrap first.