Welding parameter lookup
57 settings stated on camera by creators, extracted from 137 videos; each row links to the project and the moment in the original clip.
| Cell | Material | Welder | Setting | Source | |
|---|---|---|---|---|---|
| — | Nickel strip (handles 0.4, per the seller); stainless utility-knife blade (test) | UF20B | Gear 31 (rapid-fire); 99 (welded through a blade) | Idle Honglin · Ep. 2 | Spot welde… · 01:07 | |
| — | Nickel strip (included) | UF20B | Gear Default 05, max 100 · Pulse width 20 ms | Electro Wu · Episode 732 · 01:37 | |
| — | Copper strip (+ 0.12 nickel-plated steel strip base layer as control) | UF20B | Gear 60 | CrazyFun · Welder at gear 60,… · 00:39 | |
| — | 0.15 nickel strip; can take 0.1–0.15 copper on top | UF20B (P60F also on camera) | Gear 30 (both welders compared); 40 (harsher) | CrazyFun · Ep. 178 | The weld… · 00:27 | |
| — | Stacked combinations: 0.15 nickel-plated + 0.1 copper + 0.15 nickel-plated; 0.1 nickel-plated + 0.15 copper + 0.1 nickel-plated; 0.15 nickel + 0.15 copper (thinner top layer) | UF20B (upgraded to the No. 6 welding pen) | Gear 20 | CrazyFun · Episode 183 | When… · 00:28 |
These are creators’ own settings as stated in their videos, not official AWithZ values; welder condition, tip wear and strip batch all matter — always test on scrap first.