User content is not official advice; where it conflicts with official documents, the official documents prevail.Safety & Use Guidelines ›

© 2026 AWithZ
Post
LV3
BlindFix@71746738761 ·
Blind Tool Repair ep. 37, ‘batteries — can’t repair them but can build them’: a hot-glue gun that won’t heat is a loose wire; a customer asks original or home-made battery — a 15-cell tool pack built on the spot, 3.95V per cell, ¥130; then a stripped screw, worn carbon brushes, a tripped breaker, 607/608 bearings, ¥40 housing; 320k likes
A customer’s hot-glue gun lights up but won’t heat; open it, a wire has come off, stick it back, nothing wrong. Another wants a battery ‘delivered to Hanlin Huafu’ and asks whether to use an original or have me build one — ‘whichever works’; take 15 cells, open the cover, beautiful; measure a single cell at 395 (3.95V); pack assembled, done, ¥130. Then: a stripped screw inside a drill, apply some tricks (scorching hot; I have a way to fix it, done in the open, no secrets); an angle grinder won’t turn, the carbon brushes are worn, and the breaker tripped again (protecting the motor); another one also brushes and a broken wire, brushes are aftermarket not original; bearings are all gone, housing ¥40, bearings ¥10, swap in 607 and 608 bearings; ¥10 each. 9339 comments: top comment ‘original battery or one I make’ at 240k; ‘original isn’t as good as hand-built’; experienced viewers advise not to stick paper on the cell sides (absorbs water), use PET; someone asks whether the assembled pack can be recharged.
|
Ep. 37 | Batteries? I can’t repair them, but I can build themProjectsBlindFix

Comments (11)

南
南宫同学 · 1 yr ago

I used to be in Jiangsu, and what I replaced most was carbon brushes on grinders — 100, 125, 150, three sizes of grinder, sitting on a stool made from an electrode reel swapping brushes from morning till night. Thanks for reminding me of the lean years

熊
熊本熊 · 3 mo ago

A brand-new Dayi angle grinder is only ¥80-odd

LikeReply
黄
黄哪儿跑 · 1 yr ago

What a niche line, 'original battery, or one I make' 24k

LikeReply
J
Jason~diver · 1 yr ago

Watched your videos for a few days and now my Bosch impact drill broke

闭
闭眼修工具Author · 1 yr ago

Hardware Conan

俺
俺没啥特长就是网名特别长 · 1 yr ago

Hanlin Huafu? Is the creator from Zhangwu?

.
. · 1 yr ago

No offence, I'm a girl, don't roast me, I genuinely don't know — once the pack is assembled and runs flat, can it be recharged?

可
可乐 · 1 yr ago

Original battery or hand-built? As long as it works. Hand-built one (what does that tell you, that the original isn't as good as hand-built)

7499Reply
࿈
࿈꯭美꯭人꯭画꯭卷꯭࿐ · 1 yr ago

Honest price, I'm tinkering with my own right now

里
里昂 · 1 yr ago

From work experience and my own battery DIY: better not to stick paper on the sides of the cells, it fails easily once wet, and this paper absorbs water — it gets soggy even in humid weather. If you must, use PET; honestly not sticking anything is fine, the housing's protection and insulation is more than enough, and it's ventilated so it dries easily. @BiyanXiuGongju

不
不姳 · 1 yr ago

I have an immature idea, not sure if I should say it! I'll open a repair shop too! And take whatever comes in to him to fix!

No more