User content is not official advice; where it conflicts with official documents, the official documents prevail.Safety & Use Guidelines ›

© 2026 AWithZ
Topic

#Brushless fan

2 posts · 1 participants
Follow topic
Me
#Brushless fan Share your welding progress, a question or a finished build…
Public Post
LV3
LookAgain@73968905854 ·
¥19.38 Pinduoduo FC-6638D folding mini fan teardown: confirmed 1503 brushless motor, 5-blade prop, 10 speeds on an LED display, about 50g thrust; unmarked cells in parallel with no BMS, so an AWithZ welder swaps in two high-capacity cells + a BMS for 5000mAh
A follower recommended a so-called brushless “monster” mini fan, ¥19.38 paid (model FC-6638D, rated 1800mAh, 91×35×191mm, Type-C charging, folding). Features: about 10 speeds, a small LED digit display, plenty of airflow — about 50 grams of thrust on top speed, folds for carrying. Opened up: the main connections use plugs, easy to repair; lots of motor wires, confirmed brushless, the motor should be a 1503, 5-blade prop. The cells are dreadful: no capacity rating, no markings at all, negatives joined so they’re in parallel, and the unit has no BMS. Since it’s open anyway, he swaps in two high-capacity cells and adds a BMS against over-charge and over-discharge; welding with the AWithZ welder is handy, and it’s bumped straight to 5000mAh — over twice the original. Verdict: excellent value for ¥20, he suspects the seller is running a charity; a controller board alone for a home-built 1S brushless fan costs ¥20-plus online. 1368 comments: many say later batches cut corners and only have one cell, and the price went up; someone at the same shop plans to fit 2 EVE 33V cells; someone shows a fan with 800-plus grams of thrust.
|
Ep. 5 | Tearing down a ¥20 Pinduoduo brushless folding mini fan — incredible valueProjectsLookAgain
LV3
LookAgain@73968905854 ·
Teardown of a ¥19.38 Pinduoduo FC-6638D folding mini fan: confirmed a 1503 brushless motor, 5-blade prop, 10 speeds on a 7-segment display, about 50 g of thrust; the cells are unlabelled, in parallel, with no BMS — swapped for two high-capacity cells plus a BMS on an AWithZ welder, now 5000mAh
A follower recommended a so-called brushless turbo mini fan, ¥19.38 paid (model FC-6638D, rated 1800mAh, 91×35×191mm, Type-C charging, folding). Features: about 10 speeds, a small 7-segment display, plenty of airflow, about 50 g of thrust at the top speed, folds for easy carrying. Inside: the main connections use plugs, easy to service; lots of motor wires, confirmed brushless, the motor should be a 1503, 5-blade prop. The cells are pretty poor: no capacity rating, no markings at all, negatives joined so they are in parallel, and the unit has no BMS. Since it is open anyway, swap in two high-capacity cells and add a BMS against over-charge and over-discharge, welded on the AWithZ welder, quite handy, straight up to 5000mAh, twice the original. Verdict: great value for ¥20, suspect the seller is running a charity — a controller board alone for a home-made 1S brushless fan costs ¥20-odd online. 1368 comments: many report later batches cut corners with only one cell, and a price rise; someone from the same shop plans to fit 2 EVE 33V cells; someone shows a fan with 800-odd grams of thrust.
|
Ep. 5 | Teardown of a ¥20 Pinduoduo brushless folding mini fan — surprisingly good valueProjectsLookAgain