UKF10 Support center
300g pocket supercapacitor welder: 1750A / 10.2kW, 2×1000F, 40W USB-C input with 40-second recharge, knob + 2.0" screen, three trigger modes, welds 0.35mm nickel-plated steel.
First make sure the pins are pressed firmly and the surface is clean; start low and step up — 0.1–0.15mm Ni-plated steel usually needs only a low-to-mid level. Look up settings by cell model × material in the WeldWorld parameter lookup.
官方实验室最大值:镀镍钢带 0.35mm,纯镍带 0.3mm,紫铜带 0.1mm,不锈钢带 0.3mm,铁片 0.3mm。不同材料批次与环境有差异,先在废料上试焊。
Pins are consumables — dress or replace them when welds enlarge, spark often or blacken noticeably; see the manual's pin-change section and the Academy videos for steps.
Supercapacitor models need no charge maintenance — store them dry at room temperature; on next use, plug in for about 10 seconds to recharge.
主机 1 年
Sample general question bank; UKF10-specific questions are to be added by the brand and support team. Site-wide FAQs are in the support center FAQ.