
U2
Welder and power bank in one

![[Welding Test] AWithZ U3pro Spot Welder, perfect solder join](https://cdn.awithz.com/assets/_derived/w480/community/works/ybkmWIjeLf28/cover.webp?v=6a219993.q82)









![[Welding Test] AWithZ U3pro Spot Welding Machine, One click](https://cdn.awithz.com/assets/_derived/w480/community/works/yenIkw4ZavW4/cover.webp?v=7a68fb27.q82)



![[Welding demonstration] 18650 battery pack welding demonstra](https://cdn.awithz.com/assets/_derived/w480/community/works/yJrCpg21PERo/cover.webp?v=24dad897.q82)

![[Welding test] 99 speed welding, multi-material adaptation,](https://cdn.awithz.com/assets/_derived/w480/community/works/ynFksYj6IKyE/cover.webp?v=c1b37896.q82)

![[DIY] AWithZ U3 Pro spot welder — hand-building](https://cdn.awithz.com/assets/_derived/w480/community/works/d084/cover.webp?v=30867de9.q82)





![[DIY] AWithZ U3 Pro spot welder: a home-made spa](https://cdn.awithz.com/assets/_derived/w480/community/works/d086/cover.webp?v=5384d0a0.q82)


![[Welding test] AWithZ U3 Pro spot welder — perfe](https://cdn.awithz.com/assets/_derived/w480/community/works/d092/cover.webp?v=37ff5623.q82)
![[DIY] AWithZ U3 Pro spot welder — a home-made sp](https://cdn.awithz.com/assets/_derived/w480/community/works/d085/cover.webp?v=381542e7.q82)

![[Welding demo] AWithZ U3 Pro spot welder — 18650](https://cdn.awithz.com/assets/_derived/w480/community/works/d087/cover.webp?v=cb61f2e8.q82)

![[Welding test] AWithZ U3 Pro spot welder — gear](https://cdn.awithz.com/assets/_derived/w480/community/works/d090/cover.webp?v=95b85ca8.q82)
![[DIY] Homemade 20,000mah power bank, safe and reliable, guar](https://cdn.awithz.com/assets/_derived/w480/community/works/ybWMAG5ZWx1k/cover.webp?v=6962e3ed.q82)










First make sure the pins are pressed firmly and the surface is clean; start low and step up — 0.1–0.15mm Ni-plated steel usually needs only a low-to-mid level. Look up settings by cell model × material in the WeldWorld parameter lookup.
Pins are consumables — dress or replace them when welds enlarge, spark often or blacken noticeably; see the manual's pin-change section and the Academy videos for steps.
For lithium models, top up to 50–80% every three months; avoid heat and long-term storage at full charge.
Anything unclear in this course?
Tell us which step or which model is missing and we will add lessons.